Faculty Of Dentistry Graduation Project

Permanent URI for this communityhttp://185.252.233.37:4000/handle/123456789/46

Browse

Browsing Faculty Of Dentistry Graduation Project by Title

Filter results by typing the first few letters
Now showing 1 - 20 of 33
  • No Thumbnail Available
    Item
    3D PLANNING OF IMPLANT PLACEMENT AND SURGICAL GUIDE FABRICATION
    (October university for modern sciences and arts, 2018) Abd El Fattah, Osama; Helmy, Mario
    The 3D technology has become an effective tool in the field of dentistry. The aim of this project was to assess the use of 3D virtual planning and 3D printing for the rehabilitation of edentulous mandible by dental implants. By the aid of Blue Sky Bio software, the pre-operative 3D virtual planning was performed. The surgical plan was to place 8 dental implants in the edentulous mandible to support a fixed prosthesis. A surgical guide was virtually constructed according to the pre-operative planning, printed, and sterilized to be used in the surgery
  • No Thumbnail Available
    Item
    3D VIRTUAL PLANNING IN ORTHOGNATHIC SURGERY
    (October University for Modern Sciences and Arts, 2018) Saleh, Mohammed Chehata, Ingy Sherif, Momen Soliman, Ahmed
    3D virtual planning (VP) has become an effective diagnostic tool in orthognathic surgery. In the following case 3D VP was compared to traditional technique in pre-operative surgical planning of orthognathic surgery. Mimics software was used to perform the planning, segmentation, and 3D printing of surgical splints. The reported case was for 22 years old female patient who complains from gummy smile and skeletal problem. The pre-operative surgical planning was to perform maxillary impaction and mandibular advancement to correct the gummy smile and final occlusion
  • No Thumbnail Available
    Item
    The application of new technology in periodontal field “Augmented Reality”
    (October University of Modern Sciences and Arts, 2019) atef salah, Mohamed; Khalid, Mai; maher, Merna; kamal, Radwa
    Augmented Reality: Augmented reality is the technology that expands our physical world, adding layers of digital information onto it. Unlike Virtual Reality (VR), AR does not create the whole artificial environments to replace real with a virtual one. AR appears in direct view of an existing environment and adds sounds, videos, and graphics to it.
  • No Thumbnail Available
    Item
    APPLICATIONS OF STERIOPHOTOGRAMETRY IN ORAL & MAXILLOFACIAL SURGERY
    (October University for Modern Sciences and Arts, 2018) Ahmed, Ibrahim; Sultan, Omnia; Esmat, Essam-El-Din
    The aim of this project was to discuss the applications of steriophotogrametry in dentistry. Obtaining of 3D images was previously done through taking 2 images of the same object by moving the camera to the other side without changing the level of imaging. Nowadays by the evolution in imaging, 3D image has become much easier. The 3D laser scanning and digital cameras along with software as 3DMD or Genex system are now used. This technology is used in maxilla-facial reconstructions, evaluating the abnormality of malformed craniofacial features, 3D model fabrication, Orthognathic surgery and Forensic identification
  • No Thumbnail Available
    Item
    APPLICATIONS OF STERIOPHOTOGRAMETRY IN ORAL & MAXILLOFACIAL SURGERY \\ GP \\ DR.Nader ElBokle
    (October university for modern sciences and arts, 2018) Ahmed, Ibrahim; Esmat, Essam-El-Din; Sultan, Omnia
    The aim of this project was to discuss the applications of steriophotogrametry in dentistry. Obtaining of 3D images was previously done through taking 2 images of the same object by moving the camera to the other side without changing the level of imaging. Nowadays by the evolution in imaging, 3D image has become much easier. The 3D laser scanning and digital cameras along with software as 3DMD or Genex system are now used. This technology is used in maxilla-facial reconstructions, evaluating the abnormality of malformed craniofacial features, 3D model fabrication, Orthognathic surgery and Forensic identification
  • No Thumbnail Available
    Item
    Bio-printing
    (October university for modern sciences and arts, 2019) Orabi, Israa Abdelbadie
    Bio-printing is an extension of traditional 3D printing. It produces living tissue, bone, blood vessels and, potentially, whole organs for use in medical procedures, training and testing. T It provides the opportunity to generate patient-specific tissue for the development of accurate, targeted and completely personalized treatments.
  • No Thumbnail Available
    Item
    Comprehensive Care Case (1)
    (MSA, 2020) Fayed, Sherif; Yasser, Arwa; Ashraf, Rania; Ibrahim, Mohamed; Ibrahim, Fayrouz
    Full mouth reconstruction has always been challenging to the prosthodontist in order to obtain the acceptable achievable treatment that satisfies our patients. A 54-year-old female patient came to MSA clinics seeking help for restoring severely decayed and lost dentition. Full mouth reconstruction started by: 1. Removal of all carious lesions and stabilizing the bite. 2. Surgical extraction of non-restorable teeth 3. Rehabilitation by implants, fixed and removable prosthesis. It took over a year and half to obtain the optimum result and the patient is regularly called for follow-up appointments.
  • No Thumbnail Available
    Item
    Comprehensive Care Case (2)
    (MSA, 2020) Nehad, Mostafa; El Zawahry, Logyna; Hossam, Heba
    Smile design and esthetic dentistry has become a major concern among patients. This report introduces a female patient came to MSA University dental Clinics concerning her deformed smile. Upon examination it was found that the patient’s main concern was restoring her smile. The patient was consented to begin our treatment which included: • Installing 3 anterior implants • Constructing full coverage crowns over her badly decayed teeth. The patient was very satisfied about the final outcome. Regular follow-up and post-operative visits have been planned.
  • No Thumbnail Available
    Item
    Comprehensive Care Case (4)
    (MSA, 2021) Nehad, Mostafa; ElZawahry, Logyna; Girgis, John; Adel, Peter; Nabil, Mina; Medhat, Ereeny; Safwat, Poula; Hany, Radwa
    68 years old female patient came to MSA outpatient clinics seeking treatment for her severely worn out teeth and replacement of her lost dentition. The patient as directed for treatment as follows: I. Restorative treatment for all decayed dentition. II. Endodontic therapy for the exposed dentition. III. Motivational mockup and temporary Removable Partial Denture to stabilize the occlusion for 3 months. IV. Prosthodontic rehabilitation by fixed restorations for upper arch dentition. V. Implant supported fixed screw retained restoration replacing the lower edentulous area. Finally, our final outcome for restoring function and aesthetic has been achieved, the patient was satisfied by the service presented for her and follow-up visits was scheduled
  • No Thumbnail Available
    Item
    Comprehensive Care Case (5)
    (MSA, 2021) Alaa El Din Hassanein, Dina
    A 45-years-old male patient came to the outpatient clinic, MSA university complaining from difficulty of chewing and non-esthetic smile. Clinical examination revealed: • multiple remaining roots #11 #26 #37 #45 #46 #47 • multiple edentulous spaces, extensive decay in tooth number #12 #13 #21 #24 #34. • Plaque and calculus deposits including moderate chronic periodontitis at lower incisors • chronic mild periodontitis at the lower lateral and canine teeth. • Generalized plaque induced gingivitis at upper teeth is also seen on periodontal examination. After patient agreement on the proposed treatment plane, open and close sinus lift surgeries followed by implants and full coverage crowns in addition to restoration of carious teeth were caried out. The patient was followed up for 6 months postoperatively. The patient was extremely satisfied with the functional and esthetic rehabilitation performed. Posterior bone height was restored with a simple technique followed by implants. The patient’s smile restored using zirconia crowns.
  • No Thumbnail Available
    Item
    Comprehensive Care Case (6)
    (MSA, 2021) Mostafa Suliman, Mariam; Atiya, Ahmed; tarek, Nourhan; Emad, Aya
    Oral health and aesthetics became the prime concern for society for being part of their psychological confidence and esteemed personality. A tour guide came to the outpatient clinic at MSA University seeking a solution for his anterior teeth, spacing and discoloration. A treatment plan was made as follows: • Diagnostic manual wax up followed by motivational mock testing function, esthetics and phonetics has been made and the patient was satisfied about the outcome from the provisional restoration. • Guided preparation through the mock-up has been made for the upper six anterior teeth and lithium di-silicate (Emax) veneers were constructed and cemented. The patient was very satisfied about the final outcome as we were able to establish his psychological rapport and confidence at work as a tour guide.
  • No Thumbnail Available
    Item
    Comprehensive Care Case (7)
    (MSA, 2021) Mostafa, Mohamed; Mohamed, Barakat
    A female patient came to the outpatient clinic at the faculty of dentistry, MSA university seeking a solution for her unesthetic smile. Upon examination we found several decayed dentition and defective teeth structure. We started by I. full gum and periodontal treatment and emphasizing on oral hygiene measures. II. Restoration for the decayed dentition. III. Restoring the upper six anterior teeth. Strict oral hygiene instructions were given to her and regular follow up visits were planned.
  • No Thumbnail Available
    Item
    Comprehensive Case Care (3)
    (MSA, 2021) Momtaz, Omar; Haitham, Nourjahan; Samir, Mariam; Amir, Mary; Raouf, Miriam
    Molar incisor hypoplasia is a rare condition affecting the permanent first molars and anterior teeth compromising function and esthetics. A Female Patient came to MSA University’s outpatient clinic suffering from low self-confidence and inability to chew food. Upon examination and investigations, she was diagnosed with Molar Incisor Hypoplasia where her anterior teeth and first molars in both maxilla and mandible were affected. A detailed treatment plan was made starting with: I. periodontal therapy II. full ceramic crowns in upper anterior teeth and direct veneers in lowers III. endodontic treatment in the molars IV. implants in the missing lower molar and bridge on the other side. The chosen treatment plan showed great results and satisfaction of the patient
  • No Thumbnail Available
    Item
    Computer-Guided All-On-Four Hybrid Prosthesis
    (October University for Modern Sciences and Arts, 2019) Mohamed, Sarah Abou El Fetouh; mossad, Walaa ahmed; Hussein, Yasmin mohamed; Yomna mohamed abou, Yomna mohamed
    A completely edentulous patient came to the outpatient clinic in MSA University seeking a fixed solution instead of his poorly retained mandibular complete denture. Upon clinical and radiographic examination, the posterior ridge was severely resorbed. Thus, the All-On-Four concept was indicated for this case. A CAD-CAM surgical guide was digitally designed and constructed in order to perform computer guided 4 implant placement using flapless surgical technique. After 4 months of osseointegration, implants were loaded with a fixed detachable hybrid prosthesis restoring both function and aesthetics.
  • No Thumbnail Available
    Item
    CORRECTION OF THE OCCLUSION AND VERTICAL DIMENSION OF OCCLUSION WITH ESTABLISHING ESTHETICS AND FUNCTION
    (October University of Modern Sciences and Arts, 2018) Abd ElHadi, Youmna; Mahmoud, Basma; Ezzat, Basma
    A 62 years old female patient came to MSA clinics complaining of inability to eat and poor aesthetics. Clinical and radiographic examination revealed fractured anterior teeth, multiple missing teeth and multiple decayed posterior teeth. The aim of this project was the functional and esthetic rehabilitation of the patient’s dentition. This target was achieved through meticulous face bow and centric relation records along with minimal raise in vertical dimension of occlusion (VDO).To restore the esthetic aspect, several modifications of mockup were made and the most suitable one was constructed, taking into consideration the patient’s facial dimensions. Finally, Fixed Porcelain Fused to Metal (PFM) prosthesis with a harmonious occlusion was constructed
  • No Thumbnail Available
    Item
    Direct Full Mouth Restorative
    (October University for Modern Sciences and Arts, 2019) ahmed, Kareem abdelfattah; ahme, Omar ehab; abdelhaleem, Dina khaled; abdalfattah, Heba hossam
    A 22 old male presented to MSA clinics with badly decayed teeth, The patient was embarrassed form his smile. A treatment plan is set to restore esthetics without affecting the function. Regarding the patient chief complain, the treatment plan started with periodontal therapy (scaling & polishing) followed by conservative therapy anteriorly then posteriorly. Endodontic treatment is done in 2 exposed teeth followed by post and core placement then fixed prosthesis.
  • No Thumbnail Available
    Item
    Esthetic Rehabilitation
    (October University for Modern Sciences and Arts, 2019) Suliman, Mariam; Emad, Aya; Tarek, Nourhan; Atyia, Ahmed
    Patient came to the clinic complaining from his bad smile. He had multiple spacing & teeth discoloration. The treatment Plan included scaling & polishing, motivational mockup was made. Then Crown lengthening to modify zenith point according to mockup. Teeth were prepared for guided veneers for the 6 anterior teeth and 1st premolars. Finally, isolation & cementation of veneers was performed.
  • No Thumbnail Available
    Item
    Esthetic Rehabilitation
    (October University for Modern Sciences and Arts, 2019) Sarwat, Omar Mohamed; Elsharawy, Rana Abdallah; Ammar, Omar Mohamed; . Khattab, Mohamed A; Mahmoud, Nouran Khaled
    Full smile makeover for a 22 year old female presenting with multiple carious lesions and unsatisfied with her smile. Endodontic, periodontal, and operative treatments were performed. Restorative treatments done to all molars and premolars of the upper arch. Restorative treatment to all molars of the lower arch except for the lower left 6 endodontic treatment was done.
  • No Thumbnail Available
    Item
    Esthetic Rehabilitation
    (October University for Modern Sciences and Arts, 2019) Nasr, Essam; Safi, Mohamed; Alaa, Yahya; Mohamed, Omar; Adham, Tarek
    The patient came to operative clinic seeking esthetic problem , subsequently suitable treatment plan was performed as following: 1) supra-gingival and sub-gingival Scaling, polishing and oral hygiene instructions. 2) Surgical extraction of the remaining root of the upper right canine. 3) Restoration of cervical caries in lower right and left 4. 4) Restoration of caries in lower left 8, upper right and left lateral incisors, upper right central incisor, upper left canine, and upper right and left 4. 5) Bilateral endo-treatment of lower left and right 6.
  • No Thumbnail Available
    Item
    Esthetic Rehabilitation
    (October university for modern sciences and arts, 2019) Momtaz, Yaman; El ganagy, Mohamed; Mahfooz, Abdalla; El naggar, Hazem
    23 years old patient has suffered from bad esthetics and psychological insecurity about her smile due to enamel hypoplasia, she was going to get married in a matter of weeks from the start of our project. We managed to get her smile and confidence to the highest level in time and we delivered before her wedding day leaving her highly satisfied and confident. To achieve that we had to do a series of treatment for her inflamed gingiva by scaling and polishing then as a part of our smile design we decided to do a simple gingivectomy procedure before preparing her teeth and delivering the final smile with e-max crown and veneers