Faculty Of Dentistry Graduation Project

Permanent URI for this communityhttp://185.252.233.37:4000/handle/123456789/46

Browse

Browsing Faculty Of Dentistry Graduation Project by Issue Date

Filter results by year or month
Now showing 1 - 20 of 33
  • No Thumbnail Available
    Item
    FULL MOUTH REHABILITATION AND ESTHETIC RESTORATION OF SEVERELY MUTILATED TEETH
    (October university for modern sciences and arts, 2018) Mansour, Ahmed; Al-Agamawy., Tarek; Abd ElHameed., Reem; Zein Aldin., Mohamed; Ibrahim, Passant; Ahmed, Nourhan
    A 22 years old female patient presented to MSA clinics with bad oral hygiene, badly decayed teeth, and remaining roots. A treatment plan was set to restore both function and esthetics. The treatment plan started with periodontal therapy, followed by conservative therapy to restore all the badly decayed teeth. Then endodontic therapy was performed in all non-vital teeth. Furthermore, prosthetic therapy was performed. Surgical plan involved surgical extraction of non-restorable teeth, and implant placement. Virtual planning using Blue Sky Bio program was used to guide to the perfect alignment of implants, bone density measurements and finally surgical guide fabrication which was then 3D printed to be used in surgery
  • No Thumbnail Available
    Item
    ESTHETICS REHABILITATION OF SEVERELY DECAYED UPPER ANTERIOR TEETH
    (October University of Modern Sciences and Arts, 2018) Said, Amira; Hamdy, Ahmed; Taher, Heba; ElFadaly, Lamyaa; Abou Heikal, Mohamed; ElMaghraby, Ihab; Al Afify, Reham; Badawi, Ahmed
    Nowadays, smile enhancement is considered a high demand to fulfill patient’s smile fantasy. A 30 year old male patient presented to MSA clinics complaining from life time problem of anterior teeth. Clinical examination revealed multiple decayed teeth with old composite restorations, in addition to several missing teeth and remaining roots. Restoration of badly destructed upper anterior teeth was performed by root canal treatment, fiber post, composite core then all ceramic crowns. Upon radiographic examination using panorama and cone beam CT, implant were excluded as a treatment modality to restore posterior teeth so flexible denture was the treatment of choice.
  • No Thumbnail Available
    Item
    3D VIRTUAL PLANNING IN ORTHOGNATHIC SURGERY
    (October University for Modern Sciences and Arts, 2018) Saleh, Mohammed Chehata, Ingy Sherif, Momen Soliman, Ahmed
    3D virtual planning (VP) has become an effective diagnostic tool in orthognathic surgery. In the following case 3D VP was compared to traditional technique in pre-operative surgical planning of orthognathic surgery. Mimics software was used to perform the planning, segmentation, and 3D printing of surgical splints. The reported case was for 22 years old female patient who complains from gummy smile and skeletal problem. The pre-operative surgical planning was to perform maxillary impaction and mandibular advancement to correct the gummy smile and final occlusion
  • No Thumbnail Available
    Item
    MULTIDISCIPLINARY APPROACH TO RESTORE FUNCTION AND ESTHETICS FOR A PATIENT WITH MAL-ALIGNED ANTERIOR TEETH AND MULTIPLE MISSING AND CARIOUS DENTITION
    (October University of Modern Sciences and Arts, 2018) Hashem, Ahmed; Ebeid, Ahmed; Sultan, Omnia; Abou Heikal, Mohamed; Wagdy, Ahmed; ElFadaly, Lamyaa; AbdelAal, Hadir; Hesham, Fatma; Genina, Abdelrahman
    In modern dentistry, there is an increased demand of perfect smile and painfree, healthy oral environment. An 18 years old female patient with mal-aligned anterior teeth, multiple carious and missing teeth came to MSA clinic seeking a solution. After clinical and radiographic examination, full mouth rehabilitation was planned and achieved by Implant placement with bone graft, Operative treatment of the carious teeth, Endodontic treatment of non-vital teeth, and periodontal treatment followed by restoring normal alignment of anterior teeth using Digital Smile Design and virtual 3D dental designer. Finally, patient aesthetic satisfaction was obtained
  • No Thumbnail Available
    Item
    3D PLANNING OF IMPLANT PLACEMENT AND SURGICAL GUIDE FABRICATION
    (October university for modern sciences and arts, 2018) Abd El Fattah, Osama; Helmy, Mario
    The 3D technology has become an effective tool in the field of dentistry. The aim of this project was to assess the use of 3D virtual planning and 3D printing for the rehabilitation of edentulous mandible by dental implants. By the aid of Blue Sky Bio software, the pre-operative 3D virtual planning was performed. The surgical plan was to place 8 dental implants in the edentulous mandible to support a fixed prosthesis. A surgical guide was virtually constructed according to the pre-operative planning, printed, and sterilized to be used in the surgery
  • No Thumbnail Available
    Item
    CORRECTION OF THE OCCLUSION AND VERTICAL DIMENSION OF OCCLUSION WITH ESTABLISHING ESTHETICS AND FUNCTION
    (October University of Modern Sciences and Arts, 2018) Abd ElHadi, Youmna; Mahmoud, Basma; Ezzat, Basma
    A 62 years old female patient came to MSA clinics complaining of inability to eat and poor aesthetics. Clinical and radiographic examination revealed fractured anterior teeth, multiple missing teeth and multiple decayed posterior teeth. The aim of this project was the functional and esthetic rehabilitation of the patient’s dentition. This target was achieved through meticulous face bow and centric relation records along with minimal raise in vertical dimension of occlusion (VDO).To restore the esthetic aspect, several modifications of mockup were made and the most suitable one was constructed, taking into consideration the patient’s facial dimensions. Finally, Fixed Porcelain Fused to Metal (PFM) prosthesis with a harmonious occlusion was constructed
  • No Thumbnail Available
    Item
    APPLICATIONS OF STERIOPHOTOGRAMETRY IN ORAL & MAXILLOFACIAL SURGERY \\ GP \\ DR.Nader ElBokle
    (October university for modern sciences and arts, 2018) Ahmed, Ibrahim; Esmat, Essam-El-Din; Sultan, Omnia
    The aim of this project was to discuss the applications of steriophotogrametry in dentistry. Obtaining of 3D images was previously done through taking 2 images of the same object by moving the camera to the other side without changing the level of imaging. Nowadays by the evolution in imaging, 3D image has become much easier. The 3D laser scanning and digital cameras along with software as 3DMD or Genex system are now used. This technology is used in maxilla-facial reconstructions, evaluating the abnormality of malformed craniofacial features, 3D model fabrication, Orthognathic surgery and Forensic identification
  • No Thumbnail Available
    Item
    The Use Of Ultrasonic Technology in Endosugrical proceders
    (October University of Modern Sciences and Arts, 2018) Ibrahim, Passant; Ahmed, Nourhan; Khaled, Reem
    A 50 years old patient came to MSA clinics with a swelling related to upper right lateral incisor tooth. After clinical and radiographic examination, a radiolucent lesion surrounding an overfilled canal by 3 mm was detected. Treatment plan was to perform apicectomy, and prepare the root canal for an MTA filling. Two workshops were held, one was on sheep head for surgical flap and suturing under supervision of Dr. Mohamed Hamdy, Ass. Lecturer of Oral & Maxillofacial Surgery. The 2nd one was on extracted teeth for ultrasonic tooth preparation under supervision of Dr. Hussein Shokry, Ass. Lecturer of endodontics. The surgical procedure, and MTA retrograde filling were then performed for the case.
  • No Thumbnail Available
    Item
    ESTHETICS REHABILITATION OF SEVERELY DECAYED UPPER ANTERIOR TEETH
    (October University of Modern Sciences and Arts, 2018) Said., Amira; Al Afify, Reham; Badawi, Ahmed
    Nowadays, smile enhancement is considered a high demand to fulfill patient’s smile fantasy. A 30 year old male patient presented to MSA clinics complaining from life time problem of anterior teeth. Clinical examination revealed multiple decayed teeth with old composite restorations, in addition to several missing teeth and remaining roots. Restoration of badly destructed upper anterior teeth was performed by root canal treatment, fiber post, composite core then all ceramic crowns. Upon radiographic examination using panorama and cone beam CT, implant were excluded as a treatment modality to restore posterior teeth so flexible denture was the treatment of choice.
  • No Thumbnail Available
    Item
    REHABILITATION OF ESTHETIC AND FUNCTION FOR SEVERELY CARIOUS AND MISSING TEETH USING IMMEDIATE IMPLANTS AND BONE GRAFT
    (2018) Yasser, Alaa; Basha, Islam; Awad, Abdullah
    Smile design and esthetic dentistry has become a major concern among patients. A 31 years old patient came to MSA clinics to remove all the black decay and destructed teeth. All carious lesions were treated, endodontic treatment and retreatment in multiple teeth was performed. Finally, extraction of 6 nonrestorable teeth was performed followed by immediate implant placement. Blood was withdrawn from the patient and Platelet Rich Fibrin (PRF) was prepared and used for grafting with one implant. Implants were left for 6 months for osseointegration to be finally restored by full coverage restorations. Mutilated teeth were restored by crowns and endo-crowns
  • No Thumbnail Available
    Item
    MULTIDISCIPLINARY APPRAOCH TO RESTORE FUNCTION AND ESTHETICS OF A CASE WITH AMELOGENESIS IMPERFECTA AND MALOCCLUSION USING COMPLETE DIGITAL WORKFLOW
    (October university for modern sciences and arts, 2018) Soliman, Karim; AbouHeikal, Mohamed; Wagdy, Ahmed; ElFadaly, Lamyaa; Zaazou, Nada; Maged., Fatema; Abd Elzaher., Mohamed; Omran., Hassan
    estoring anterior teeth esthetics is one of the most challenging dental managements. A 24 years old male patient came to MSA Fixed prosthodontics clinics seeking a fixed bridge for anterior teeth. However, medical and dental history with clinical examination showed that he had Amelogensis Imperfecta in the anterior region with extracted all four 1st permanent molars and 0.3mm deep bite due to traumatic enamel loss in the four anterior teeth. Digital planning (3 shape software) was used to plan for surgical and prosthetic treatment. Surgical bone augmentation using autogenous chin graft, implants placement, periodontal crown lengthening and full coverage crowns were made to restore function and esthetics.
  • No Thumbnail Available
    Item
    APPLICATIONS OF STERIOPHOTOGRAMETRY IN ORAL & MAXILLOFACIAL SURGERY
    (October University for Modern Sciences and Arts, 2018) Ahmed, Ibrahim; Sultan, Omnia; Esmat, Essam-El-Din
    The aim of this project was to discuss the applications of steriophotogrametry in dentistry. Obtaining of 3D images was previously done through taking 2 images of the same object by moving the camera to the other side without changing the level of imaging. Nowadays by the evolution in imaging, 3D image has become much easier. The 3D laser scanning and digital cameras along with software as 3DMD or Genex system are now used. This technology is used in maxilla-facial reconstructions, evaluating the abnormality of malformed craniofacial features, 3D model fabrication, Orthognathic surgery and Forensic identification
  • No Thumbnail Available
    Item
    Esthetic Rehabilitation with Smile Design
    (October university for modern sciences and arts, 2019) Mohammed, Dina Ashraf
    A young lady came to our clinic complaining from esthetic problem due to failed orthodontic treatment. Upon examination, patient had gummy smile and necrotic pulp in upper left central. She refused orthodontic retreatment as we had to finish her treatment plan within one month before her wedding. So we started immediately with scaling and polishing then Root Canal Treatment in the upper left central incisor. Finally, veneer preparation and cementation was performed.
  • No Thumbnail Available
    Item
    Full Mouth Rehabilitation
    (October University of Modern Sciences and Arts, 2019) Ibrahim, Habiba; Ayman, Yasmine; Yasser, Nada
    The patient chief complaint was function and esthetic. So we did supra-gingival and sub-gingival scaling and polishing first, then endodontic treatment for the pulp- involved teeth, operative treatment for carious teeth, and finally, restoring the missing teeth with fixed bridges. The lower arch has a free end saddle so will be restored by removable denture. The main problem with this case was the oral hygiene and how to guide the patient to improve it.
  • No Thumbnail Available
    Item
    Bio-printing
    (October university for modern sciences and arts, 2019) Orabi, Israa Abdelbadie
    Bio-printing is an extension of traditional 3D printing. It produces living tissue, bone, blood vessels and, potentially, whole organs for use in medical procedures, training and testing. T It provides the opportunity to generate patient-specific tissue for the development of accurate, targeted and completely personalized treatments.
  • No Thumbnail Available
    Item
    Esthetic Rehabilitation
    (October University for Modern Sciences and Arts, 2019) Suliman, Mariam; Emad, Aya; Tarek, Nourhan; Atyia, Ahmed
    Patient came to the clinic complaining from his bad smile. He had multiple spacing & teeth discoloration. The treatment Plan included scaling & polishing, motivational mockup was made. Then Crown lengthening to modify zenith point according to mockup. Teeth were prepared for guided veneers for the 6 anterior teeth and 1st premolars. Finally, isolation & cementation of veneers was performed.
  • No Thumbnail Available
    Item
    Restoring aesthetics for a generalized rampant caries case
    (October University of Modern Sciences and Arts, 2019) Ahmed Ibrahim, Nada; Mai, Abd El Aziz Sedeek; Abeer, Khaled Nasreldin; Elkady, Hossam
    A 26 year old patient presented with multiple class III caries (proximal surfaces of upper anteriors not including the incisal edges), multiple class V caries in all upper anterior teeth and 1st premolars bilaterally and lower canines and premolars bilaterally as well as lower left 6, multiple class I cavities in lower right 7,8, upper right 4,5, upper left 4, with external stains due to drinking lots of coffee and internal stains due to enamel hypo- calcification, occlusal wear in upper right canine and 1st premolar, missing lower right 6, missing upper left 5 with closure of the space due to tilting of upper left 4 and upper left 6, patient was also presented with slight open bite and upon radiographic examination we found exposed lower left 5, 6, and upper right 6 and 8.
  • No Thumbnail Available
    Item
    Direct Full Mouth Restorative
    (October University for Modern Sciences and Arts, 2019) ahmed, Kareem abdelfattah; ahme, Omar ehab; abdelhaleem, Dina khaled; abdalfattah, Heba hossam
    A 22 old male presented to MSA clinics with badly decayed teeth, The patient was embarrassed form his smile. A treatment plan is set to restore esthetics without affecting the function. Regarding the patient chief complain, the treatment plan started with periodontal therapy (scaling & polishing) followed by conservative therapy anteriorly then posteriorly. Endodontic treatment is done in 2 exposed teeth followed by post and core placement then fixed prosthesis.
  • No Thumbnail Available
    Item
    Esthetic Rehabilitation
    (October University for Modern Sciences and Arts, 2019) Sarwat, Omar Mohamed; Elsharawy, Rana Abdallah; Ammar, Omar Mohamed; . Khattab, Mohamed A; Mahmoud, Nouran Khaled
    Full smile makeover for a 22 year old female presenting with multiple carious lesions and unsatisfied with her smile. Endodontic, periodontal, and operative treatments were performed. Restorative treatments done to all molars and premolars of the upper arch. Restorative treatment to all molars of the lower arch except for the lower left 6 endodontic treatment was done.
  • No Thumbnail Available
    Item
    FULL MOUTH REHABILITATION AND ESTHETIC RESTORATION OF SEVERLY MUTILATED TEETH
    (October University of Modern Sciences and Arts, 2019) Ayman Kamal, Nehal; Fathy, Yasmin; Hossam, Mennatallah
    A 30 years old male patient came to MSA clinics with bad oral hygiene, badly decayed teeth and remaining root .A treatment plan was set to restore function and esthetics. The treatment plan started with periodontal and surgical therapy, followed by conservative therapy to restore vital teeth with Glass-ionomer to enhance oral hygiene. Then, endodontic therapy for non-vital teeth followed by fiber posts and cores to re-build badly decayed teeth, Then PMMA crowns were used for the try-in that showed canting in upper anterior teeth. So, a face-bow record is re-taken and Then, Teeth received zirconia crowns as final restoration.