Faculty Of Engineering Graduation Project 2019 - 2020

Permanent URI for this collectionhttp://185.252.233.37:4000/handle/123456789/3758

Browse

Browsing Faculty Of Engineering Graduation Project 2019 - 2020 by Title

Filter results by typing the first few letters
Now showing 1 - 20 of 34
  • No Thumbnail Available
    Item
    Archaeological Center in Tall - Basta
    (MSA university, 2020) Abd El-Fattah, Ahmed
    Architecture style in tall - basta for the same purpose building
  • No Thumbnail Available
    Item
    Aroma Development HUB
    (October University for Modern Sciences and Arts, 2020) Samir, Rawan
    It Is Clear That Jasmine is Main Connector Between The Farmers Industry and Foreigner Investor.
  • No Thumbnail Available
    Item
    Business trad center in Al - Sananya
    (MSA university, 2020) Ahmed, Abd El-Rahman
    the main idea of project is the method of dividing the block in a way that correlates with the elements or zones of project and then forming the resulting locks using the modern Islamic architectural style as shown in the following picture , there is one block and then it is divided into three blocks (zones ), with are the main elements of the project tacking into account view the general location and focus on the landscape of the river area was done by placing a fourth block over the three main blocks
  • No Thumbnail Available
    Item
    Culture & Crafts Center
    (October University for Modern Sciences and Arts, 2020) Arafa, Mohamed Mahmoud
    Inspired from our rich culture motifs and Islamic pattern by using "square and pure forms" using indirect path inspired from majaz in Islamic architecture that will contribute a unique special experience for the users
  • No Thumbnail Available
    Item
    Design and Manufacturing a Prototype Machine for Production of 3D Printing Filaments Using Recycled Plastics
    (October University for Modern Sciences and Arts, 2020) Mohamed, Mohamed Sabri; Akawy, Wesam Ahmed
    Plastic waste has negative economic and environmental impacts. By using a suitable recycling process, it could be repurposed and reused in different applications. One of most interesting application is to produce the 3D printing filaments. This project aims to designing and manufacturing a prototype machine that used for the possibility of producing 3D printing filaments from the recycled Polyethylene Terephthalate Polymers (PET/PETE) which is widely used in water bottles. The recycled plastics will be supplied in forms of pellets which is to be fed to the machine through a hoper. The process consists of two main stages, the first stage is melting of the pellets by heating at specified temperature and then the molt will be extruded through a die which has the shape of the required filament size. The second stage is the cooling and wrapping the output filament, in which the cooling will be executed by passing the continuous filaments in a cooling liquid such as water and then exposed to two side fans to complete the cooling process and the then rapped on rolls. The output filaments will be used in a 3D printer to print tensile test specimens and some printed samples. The tensile test samples will be used to measure the properties, mainly the ductility, of the output filaments to be compared with the used filaments in the market. The production of 3D print filaments may save lot of money and insure the concepts of green manufacturing system by producing a useful product with low cost and safe for environment.
  • No Thumbnail Available
    Item
    Design and Manufacturing of a Machine for Producing Carbon Nanotubes
    (October University for Modern Sciences and Arts, 2020) Elattar, Mariam Magdy; Bagunaid, Mohamed Abdullah
    The production and industrial applications of Carbon Nanotubes (CNTs) are recently the main concern of research in nanotechnology. The special nature of carbon combines with the atomic flawlessness of single-wall CNTs to bless them with exceptional fabric properties, such as exceptionally tall warm and electrical conductivity, solidness, quality, and durability. It is the as it were component within the occasional table which bonds to itself in an expanded organize with the quality of the carbon-carbon bond. The delocalized pi-electron given by each iota is free to move about the full structure, rather than remaining with its benefactor iota, coming about within the to begin with known particle with metallic-type electrical conductivity. Additionally, an inherent warm conductivity higher than indeed jewel is advertised by the high-frequency carbon-carbon bond vibrations. In most materials, be that as it may, due to the event of absconds in their structure, the genuine watched fabric properties such as quality, electrical conductivity, and so on are debased exceptionally altogether. For illustration, high-strength steel regularly comes up short at as it were around 1% of its hypothetical breaking quality. In any case, CNTs accomplish values exceptionally close to their hypothetical limits owing to their atomic flawlessness of structure. This perspective is portion of the interesting story of CNTs. CNTs are cases of genuine nanotechnology: they are as it were approximately a nanometer in distance across, but are atoms that can be controlled physically and chemically in exceptionally valuable ways. They discover a mind blowing extend of applications in gadgets, materials science, vitality administration, chemical handling, and numerous other areas. The main goal of this project is to develop a complete design of an Arc Discharge (AD) machine for producing carbon nanotubes (CNT's) by using deionized water and extra pure graphite multiple electrodes 99.9% pure. The advantage of this design is to increase yield of CNTs within the experimental limitations, through the increase of the number of cathodes and anodes and by using an automatic feeding system for the electrodes, resulting in lower cost production.
  • No Thumbnail Available
    Item
    Design of Semi-Automatic Palletizing Machine
    (October university for modern sciences and arts, 2020) Iskandar, Mark Adel Fikry; El Sharkawy, Saad Wagdy
    Palletizers are machines for material handling, they are used for pallets loading either for storage or before or after shipping. Pallet loads are used for mass shipping, distributing or consolidating tiny products to larger packages easy to handle. The project objective is to design and manufacture a prototype of can palletizing machine that simulate the real application for automatic machine. Data collection of a facility of cans production line will be done to collect data concerning can dimensions and weight. This collected data will be used for design purposes. The palletizing machine will save a lot of money, time and effort and insure a continuous automatic process without any obstacles. The use of pallets as a base for unit loads offers many benefits compared to un-palletized handling that result from the more efficient handling of goods. These include: • Dramatically reduced labor requirement versus manual handling • Less risk of product damage • Reduced risk of worker injury • More efficient material handling and storage.
  • No Thumbnail Available
    Item
    Educational Center for Boat Manufaturing in Rosseta
    (October University for Modern Sciences and Arts, 2020) Nessim, Nour
    The Whole Concept is Inspired from The Struggle of How Boat Crafters Clashes With The Government to Obtain Their Legal Documents.
  • No Thumbnail Available
    Item
    Enhancement of Poultry Feed Product Homogeneity
    (October University for Modern Sciences and Arts, 2020) Abd El Latief, Abd El Latief Nasr; Abd Aziz, Basel Ehab Mahmoud
    WADI Company is formed of group of different factories dealing with agriculture business industries since started on 1984. One of the factories, located in Sadat city focused on producing small granules that contains Mono-Calcium Phosphate (MCP) as a main ingredient for poultry industry which is suitable for providing poultry with calcium and phosphorus that promotes forming hard backbone and skeleton. Production of Mono-Calcium Phosphate (MCP) pass through several sequential processes using many equipment like Mixer, Dryer, Cooler, Crasher, Vibrator and other components. After testing several samples of the final product, it was found that the ratios and distribution of the Calcium and Phosphor components in the samples are not homogeneous and deviate from the standard ratios. The objective of this project is focused on improvement of the homogeneity and distribution of the calcium and phosphor ingredients in the final product by studying all parameters and factors that may create the fluctuation of their percentages. There are many factors that may affect the homogeneity of the final product such as the mixing system, the moisture percentage. So, many tests are conducted on samples taken in each stage of manufacturing processes, namely after mixing stages, after granulator and after drying processes. The testing results of samples taken at the end of the mixing process showed percentage fluctuation and non-homogeneous distribution while after drying process some of samples which contains low moisture contents showed homogeneous distribution of ingredients. When more samples of low moisture were tested, it showed better homogeneity which confirm that the drying process is the main parameter of fluctuation of Phosphorus and Calcium percentages in the final product. The improvement of the drying process was carried out by increasing the retention time of the product inside the dryer and decreasing the speed of the dryer by 15% from 2.9 to 2.46 RPM which achieved improvement in the homogeneity in the final product.
  • No Thumbnail Available
    Item
    Equestrian complex
    (October University for Modern Sciences and Arts, 2020) Adel, Mina
    The multidimensional soil shape has provided flexibility to the current design and helped creating dynamic yet functional spaces which provides different special interesting experiences.
  • No Thumbnail Available
    Item
    Equestrian complex
    (October University for Modern Sciences and Arts, 2020) Youssef, Mark Emad
    It is an estimated that such a screen will reducing solar gain by more than 50 percent, and reduce the building's need for energy draining air conditioning.
  • No Thumbnail Available
    Item
    Explatorium of Narratives in Rosseta City
    (October University for Modern Sciences and Arts, 2020) Salah Abdel Hady, Amr
    The Plan Follows Centrality Regulations in Spaces as A Reference to Islamic Calture Which The City Follows Urbanely Architecturally and Interioly .
  • No Thumbnail Available
    Item
    Expo Dam
    (October University for Modern Sciences and Arts, 2020) Mohamed Ahmed Hussien, Rayan
    This project Aim is The City to Preserve Domietta Identity Culture and Talents.
  • No Thumbnail Available
    Item
    Fishery Service Institute (AlMatareya,Dakahlia government)
    (October University for Modern Sciences and Arts, 2020) Mohamed, Nouran
    Use of two different grids following the urban context , as well as the presence of a main spine throughout the project that leads to all the project zones and the marine at the end. Grid
  • No Thumbnail Available
    Item
    Furniture Exhibition Center of Damietta
    (October University for Modern Sciences and Arts, 2020) Ismail, Hazem
  • No Thumbnail Available
    Item
    Furniture EXPO City : New City of Damietta : Collecting Cultures Creating the Future
    (October University for Modern Sciences and Arts, 2020) El-Zomor, Hanin
    I merged between the three concept and i took the strong point of each one the main idea is using the history of Damietta to through many researches
  • No Thumbnail Available
    Item
    Implementation of a Production Plan and Developing Enterprise Resource Planning (ERP) System at Outdoor Furniture Factory
    (October University for Modern Sciences and Arts, 2020) Samir, Mina Adel; Mohamed, Maged
    Egyptian Metal & Wood Industries Group is a company specialized in furniture manufacturing. The company was established in 1986. The factory located in the 6th of October industrial zone is specialized in manufacturing of outdoor furniture, home furniture, hotel furniture, aluminum windows & door hardware (fittings). The company recently launched a new brand called ACAJIA for outdoor wooden furniture to expand its market share and to benefit the diversity of the products within similar raw materials. On analysis, sales charts show a trend of high demand at a certain period of the year. In other terms, their products are sold mostly in a specific time interval within the year summer and spring seasons. Along with, the problem of poor documentation of all data and the problems with the data being lost or not documented is also a very serious problem that the company faces. The nonexistence of a system for the sales records, inventory, and production orders, is considered a challenge that needs to be solved. The presence of a proper electronic documenting system that connects the three main departments of the factory, this will allow the administration to know every single action done from the beginning of receiving the order till the final delivery anytime, anywhere and from any device that's connected to the internet. All the company records will be saved automatically in a secured cloud system enterprise resource planning (ERP). Our objectives are to replace the absence of a production plan and the lack of communication between departments by constructing and implementing a proper production planning system through developing a forecasting model suitable for the company for the year 2020, figuring an Aggregate Plan for the company, planning a Material Requirement Plan (MRP) for the company in 2020 along with developing and training the employees to use the developed planning system efficiently.
  • No Thumbnail Available
    Item
    Improvement of Dies Exchange Operation
    (October University for Modern Sciences and Arts, 2020) Ghoniem, Ali Mohamed Mohab; Allam, Yahya Mohammed Youssef
    Single minute exchange of die (SMED) has become one of the most important and common implemented techniques that are used for dies changeover and installation time reduction. In this project, a problem to be faced which is the long setup time of dies in eleven huge presses used in sheet metal forming, located in Egypt for Engineering Industries Factory (EEI), which leads to low capacity of production, time and money losses. Engineering wise, time losses are directly translated into wastage of money and that could be the most essential problem to be solved or to be focused on, in any kind of organization or manufactory. SMED methodology has been implemented on this project so that effectiveness of the technique could be measured. After implementing the solutions, the overall installation time of dies has been reduced by 50% and it is aimed to reduce this percentage more and more after recommendations are done. Any percentage of dies changeover time could be saved is going directly to be translated into money saved and capacity of production increased as a result of dies changeover time reduction.
  • No Thumbnail Available
    Item
    Investigation of Slurry Erosion Behavior of Glass Fiber Polymer Reinforced Composites
    (October University for Modern Sciences and Arts, 2020) Mohamed, Walid Mohamed Rashad; Othman, Wagih Abd-Elgwad
    Slurry erosion is a severe problem as it leads to considerable expense caused by failures, downtime, and material replacement costs. These problems are observed in fluid machineries and fluid transportations, especially in pipelines applications such as oil and gas industry, industrial drainage, water transportation, petrol pipelines, etc. Slurry erosion is dependent on several parameters such as slurry properties, service conditions, and material properties. The present work is undertaken to study the development, characterization and erosion wear performance of polyester resin reinforced with E-glass woven fiber. Focus will be on glass fiber reinforcements as the major type of fiber materials due to cost efficiency and high mechanical properties. In order to perform the desired study, a detailed literature review was performed to investigate the different types of resins, reinforcement fibers, and test conditions available for FRPs. Parameters used in the investigation: Using silica sand of 500 µm as erodent, velocities of 10.94, 13.02, 15.45, 17.01, 18.4, 18.75, 20.66, and 23.43, and angles of 15, 30, 45, 60 , 75 and 90 at constant test duration of 1.5 hours. And Erosion test was performed in each parameter with repetition factor equals 3. The results are analyzed using design of experiment approach and applying Taguchi method and ANOVA to find the best processing conductions that leads to minimum losses to the test samples using Minitab 19.
  • No Thumbnail Available
    Item
    Palm Crystels Rosetta Heritage Complex
    (October University for Modern Sciences and Arts, 2020) Ezzat Ibrahim, Jomana
    The Nature Of Life Creates Moments That Make People Feel Connected With Nature Specially Rosetta Heritage.