Effects of Increasing Electrodes on CNTs Yield Synthesized by Using Arc-Discharge Technique

Simple item page
dc.AffiliationOctober University for modern sciences and Arts (MSA)
dc.contributor.authorYousef, Samy
dc.contributor.authorKhattab, A.
dc.contributor.authorOsman, T. A.
dc.contributor.authorZaki, M.
dc.date.accessioned2020-02-05T10:10:28Z
dc.date.available2020-02-05T10:10:28Z
dc.date.issued2013
dc.descriptionMSA Google Scholaren_US
dc.description.abstractA new design of fully automatic system was built up to produce multiwalled carbon nanotube (MWCNT) using arc discharge technique in deionized water and extra pure graphite multiple electrodes (99.9% pure). The goal of the experimental research is to determine the yield of CNT in two different cases: (a) single plasma electrodes and (b) multiplasma electrodes, particularly 10 electrodes. The experiments were performed at constant parameters (75 A, 238 V). The obtained CNT was examined by scanning electron microscope (SEM), transmission electron microscope (HRTEM), X-ray diffraction (XRD), and thermogravimetric analysis (TGA). The results showed that the produced CNT is of type MWCNT, with a diameter of 5 nm, when using multiplasma electrodes and 13 nm when using single plasma electrodes. The yield of MWCNT was found to be 320% higher in case of comparing multielectrodes to that of single plasma electrodes. Under the experimental test conditions, a yield of 0.6 g/hr soot containing 40% by mass nanotube was obtained in case of single plasma electrodes and above 60% in case of multiplasma electrodes.en_US
dc.description.urihttps://www.scimagojr.com/journalsearch.php?q=4000151616&tip=sid&clean=0
dc.identifier.citation[1] S. Ijima, “Helical microtubules of graphitic carbon,” Nature, vol. 354, pp. 56–58, 1991. [2] H. Shimoda, L. Fleming, K. Horton, and O. Zhou, “Formation of macroscopically ordered carbon nanotube membranes by selfassembly,” Physica B, vol. 323, no. 1–4, pp. 135–136, 2002. [3] P. G. Collins and P. Avouris, “Chapter 3 the electronic properties of carbon nanotubes,” Contemporary Concepts of Condensed Matter Science, vol. 3, pp. 49–81, 2008. [4] H. Rejashree, Y. Manohr, G. Harshal, V. Mohit, and K. Vilasro, “Carbon nanotubes and its applications,” Pharmaceutical and Clinical Research, vol. 2, pp. 0974–2441, 2009. [5] S. Chai, S. Zein, and A. Mohamed, A Review on Carbon Nanotubes Production Via Catalytic Methane Decomposition, NAPCOl, 2004. [6] J. Prasek, J. Drbohlavova, J. Chomoucka et al., “Methods for carbon nanotubes synthesis—review,” Journal of Materials Chemistry, vol. 21, no. 40, pp. 15872–15884, 2011. [7] C. Journet, W. K. Maser, P. Bernier et al., “Large-scale production of single-walled carbon nanotubes by the electric-arc technique,” Nature, vol. 388, no. 6644, pp. 756–758, 1997. [8] T. Sugai, H. Omote, S. Bandow, N. Tanaka, and H. Shinohara, “Production of fullerenes and single-wall carbon nanotubes by high-temperature pulsed arc discharge,” Journal of Chemical Physics, vol. 112, no. 13, pp. 6000–6005, 2000. [9] Y. Liu, S. Xiaolong, Z. Tingkai, Z. Jiewu, M. Hirscher, and F. Philipp, “Amorphous carbon nanotubes produced by a temperature controlled DC arc discharge,” Carbon, vol. 42, no. 8-9, pp. 1852–1855, 2004. [10] T. Zhao, Y. Liu, and J. Zhu, “Temperature and catalyst effects on the production of amorphous carbon nanotubes by a modified arc discharge,” Carbon, vol. 43, no. 14, pp. 2907–2912, 2005. [11] M. Cadek, R. Murphy, B. McCarthy et al., “Optimisation of the arc-discharge production of multi-walled carbon nanotubes,” Carbon, vol. 40, no. 6, pp. 923–928, 2002. [12] Y. Liu, S. Xiaolong, Z. Tingkai, Z. Jiewu, M. Hirscher, and F. Philipp, “Amorphous carbon nanotubes produced by a temperature controlled DC arc discharge,” Carbon, vol. 42, no. 8-9, pp. 1852–1855, 2004. [13] H. Qiu, Z. Shi, L. Guan et al., “High-efficient synthesis of double-walled carbon nanotubes by arc discharge method using chloride as a promoter,” Carbon, vol. 44, no. 3, pp. 516–521, 2006. [14] R. B. Mathur, S. Seth, C. Lal et al., “Co-synthesis, purification and characterization of single- and multi-walled carbon nanotubes using the electric arc method,” Carbon, vol. 45, no. 1, pp. 132–140, 2007. [15] S.-D. Wang, M.-H. Chang, J.-J. Cheng, H.-K. Chang, and K. M.-D. Lan, “Unusual morphologies of carbon nanoparticles obtained by arc discharge in deionized water,” Carbon, vol. 43, no. 6, pp. 1322–1325, 2005. [16] A. Qader, A. S. Keiteb, and M. A. Jaleel, “Synthesis of carbon nanomaterials in deionized water with and without catalyst using arc discharge technique,” Engineering Technician, vol. 29, no. 2, 2011. [17] A. Aqel, K. M. M. A. El-Nour, R. A. A. Ammar, and A. AlWarthan, “Carbon nanotubes, science and technology part (I) structure, synthesis and characterisation,” Arabian Journal of Chemistry, vol. 5, no. 1, pp. 1–23, 2012. [18] A. Thess, R. Lee, P. Nikolaev et al., “Crystalline ropes of metallic carbon nanotubes,” Science, vol. 273, no. 5274, pp. 483–487, 1996. [19] M. J. Y. Yacaman, M. M. Yoshida, and L. Rendon, “Catalytic growth of carbon microtubules with fullerene structure,” Applied Physics Letters, vol. 62, no. 2, pp. 202–204, 1993. [20] G. Che, B. B. Lakshmi, C. R. Martin, E. R. Fisher, and R. S. Ruoff, “Chemical vapor deposition based synthesis of carbon nanotubes and nanofibers using a template method,” Chemistry of Materials, vol. 10, no. 1, pp. 260–267, 1998. [21] H. W. Zhu, C. L. Xu, D. H. Wu, B. Q. Wei, R. Vajtai, and P. M. Ajayan, “Direct synthesis of long single-walled carbon nanotube strands,” Science, vol. 296, no. 5569, pp. 884–886, 2002. [22] M. Keidar and A. M. Waas, “On the conditions of carbon nanotube growth in the arc discharge,” Nanotechnology, vol. 15, no. 11, pp. 1571–1575, 2004. [23] N. Grobert, “Carbon nanotubes—becoming clean,” Materials Today, vol. 10, no. 1-2, pp. 28–35, 2007. [24] M. Ishigami, J. Cumings, A. Zettl, and S. Chen, “A simple method for the continuous production of carbon nanotubes,” Chemical Physics Letters, vol. 319, no. 5-6, pp. 457–459, 2000. [25] Y. S. Park, K. S. Kim, H. J. Jeong, W. S. Kim, J. M. Moon, K. H. An et al., “Low pressure synthesis of single-walled carbon nanotubes by arc discharge,” Synthetic Metals, vol. 126, no. 2-3, pp. 245–251, 2002. [26] M. Teymourzadeh and H. Kangarlou, “Synthesis of multiwalled carbon nanotubes in an arc discharge using hydrocarbons precursor as carbon sources,” Sciences, vol. 18, no. 7, pp. 879–883, 2012. [27] Z. Shi, Y. Lian, X. Zhou et al., “Mass-production of single-wall carbon nanotubes by arc discharge method,” Carbon, vol. 37, no. 9, pp. 1449–1453, 1999. [28] M. Jahanshahi, M. Shariaty-Niassar, A. A. Rostami, H. Molavi, and F. Toubi, “Arc-discharge carbon nanotube fabrication in solution: electrochemistry and voltametric tests,” Australian Journal of Basic and Applied Sciences, vol. 4, no. 12, pp. 5915– 5922, 2010. [29] H. W. Zhu, X. S. Li, B. Jiang et al., “Formation of carbon nanotubes in water by the electric-arc technique,” Chemical Physics Letters, vol. 366, no. 5-6, pp. 664–669, 2002. [30] M. V. Antisari, R. Marazzi, and R. Krsmanovic, “Synthesis of multiwall carbon nanotubes by electric arc discharge in liquid environments,” Carbon, vol. 41, no. 12, pp. 2393–2401, 2003. [31] S. J. Lee, H. K. Baik, J. E. Yoo, and J. H. Han, “Large scale synthesis of carbon nanotubes by plasma rotating arc discharge technique,” Diamond and Related Materials, vol. 11, no. 3–6, pp. 914–917, 2002. [32] L. P. Biro, Z. E. Horvath, L. Szalmas, K. Kertesz, F. Weber, G. Juhasz et al., “Continuous carbon nanotube production in underwater AC electric arc,” Chemical Physics Letters, vol. 372, no. 3-4, pp. 399–402, 2003. [33] S. Yousef, A. khattab, T. A. Osman, and M. Zaki, Fully Automatic System For Producing Carbon Nanotubes (CNTs) By Using ArcDischarge Technique Multi Electrodes, ICIES, 2012. [34] P. M. Ajayan, T. W. Ebbesen, T. Ichihashi, S. Iijima, K. Tanigaki, and H. Hiura, “Opening carbon nanotubes with oxygen and implications for filling,” Nature, vol. 362, no. 6420, pp. 522–525, 1993. [35] M. C. Paladugu, K. Maneesh, P. K. Nair, and P. Haridoss, “Synthesis of carbon nanotubes by arc discharge in open air,” Journal of Nanoscience and Nanotechnology, vol. 5, no. 5, pp. 747–752, 2005. [36] R. Joshi, J. Engstler, P. K. Nair, P. Haridoss, and J. J. Schneider, “High yield formation of carbon nanotubes using a rotating cathode in open air,” Diamond and Related Materials, vol. 17, no. 6, pp. 913–919, 2008. [37] M. S. S. Saravanan, S. P. K. Babu, K. Sivaprasad, and M. Jagannatham, “Technoeconomics of carbon nanotubes produced by open air arc discharge method,” Journal of Engineering Science and Technology, vol. 2, no. 5, pp. 100–108, 2010. [38] J. H. Lehman, M. Terrones, E. Mansfield, K. E. Hurst, and V. Meunier, “Evaluating the characteristics of multiwall carbon nanotubes,” Carbon, vol. 49, no. 8, pp. 2581–2602, 2011.en_US
dc.identifier.doihttps://doi.org/10.1155/2013/392126
dc.identifier.otherhttps://doi.org/10.1155/2013/392126
dc.identifier.urihttps://t.ly/J3qyV
dc.language.isoenen_US
dc.publisherHindawi Publishing Corporationen_US
dc.relation.ispartofseriesJournal of Nanomaterials;Volume 2013, Article ID 392126, 9 pages
dc.subjectElectrodesen_US
dc.subjectCNTsen_US
dc.subjectArc-Discharge Techniqueen_US
dc.titleEffects of Increasing Electrodes on CNTs Yield Synthesized by Using Arc-Discharge Techniqueen_US
dc.typeArticleen_US

Files

Original bundle

Now showing 1 - 1 of 1
Thumbnail Image
Name:
avatar_scholar_256.png
Size:
6.31 KB
Format:
Portable Network Graphics
Description:
Faculty Of Engineering Research Paper
Download

License bundle

Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
51 B
Format:
Item-specific license agreed upon to submission
Description:
Download

Collections

Faculty Of Engineering Research Paper