Effectiveness of externally bonded CFRP strips for strengthening flanged beams under torsion: An experimental study
Date
2013
Authors
Journal Title
Journal ISSN
Volume Title
Type
Article
Publisher
Elsevier
Series Info
Engineering Structures;56 . 2065-2075
Doi
Scientific Journal Rankings
Abstract
All over the world, fiber reinforced polymer (FRP) is currently being used for strengthening concrete elements, thus improving the building sustainability. The most recent report by the American Concrete Institute Committee 440 suggested that any proposed anchorage system should be heavily scrutinized before field implementation [4]. A comprehensive literature review was conducted, which showed that anchored U-jacket strips and un-anchored extended U-jacket strips were never examined for the case of RC flanged beams under significant torsion. The objective of this study is to investigate the behavior of FRP externally strengthened flanged beams subjected to torsion. Eleven beams were tested under significant torsion. Both the anchored U-jacket and the extended U-jacket strips were found to be more effective strengthening techniques compared to the un-anchored U-jacket strips and as effective as the …
Description
Keywords
External strengthening using FRP
Citation
1. Introduction 2. Literature review and research significance 3. Experimental program 3.1. Materials 3.2. External strengthening using FRP 4. Experimental results 4.1. Torsional behavior 4.2. Transversal reinforcement strain 4.3. Cracking pattern and failure mode 5. FRP contribution 5.1. Cracking strength 5.2. Ultimate strength 5.3. Ductility improvement (Δψu) 5.4. Initial torsional rigidity 6. Effectiveness of strengthening techniques 6.1. Anchored U-jacket 6.2. Extended U-jacket 6.3. Strengthening technique versus FRP Strip Ratio 7. Conclusions Acknowledgment