Browsing by Author "Abolkassem, Shimaa A."

Filter results by typing the first few letters
Now showing 1 - 1 of 1
  • Thumbnail Image
    Item
    Effect of consolidation techniques on the properties of Al matrix composite reinforced with nano Ni-coated SiC
    (ELSEVIER SCIENCE BV, 2018) Abolkassem, Shimaa A.; Elkady, Omayma A.; Elsayed, Ayman H.; Hussein, Walaa A.; Yehya, Hosam M.
    Al/Ni-SiC composite was prepared via powder metallurgy technique. SiC particles were coated with 10 wt% nano nickel by electroless deposition, then mixed by three percents (5, 10 and 15 wt%) with Al powder in a ball mill using 10: 1 ball to powder ratio for 5 h. Three types of sintering techniques were used to prepare the composite. Uniaxial cold compacted samples were sintered in a vacuum furnace at 600 degrees C for 1 h. The second group was the vacuum sintered samples which were post-processed by hot isostatic press (HIP) at 600 degrees C for 1hr under the pressure of 190 MPa. The third group was the hot pressed samples that were consolidated at 550 degrees C under the uniaxial pressure of 840 MPa. The results showed that the hot pressed samples have the highest densification values (97-100%), followed by the HIP samples (94-98%), then come the vacuum sintered ones (92-96%). X-ray diffraction analysis (XRD) indicated the presence of Al and Al3Ni, which means that all SiC particles were encapsulated with nickel as short peaks for SiC were observed. Hardness results revealed that HIP samples have the highest hardness values. The magnetization properties were improved by increasing SiC/Ni percent, and HIP samples showed the highest magnetization parameter values. (C) 2018 The Authors. Published by Elsevier B.V.