Abstract:
Researchers have focused on deriving environmentally benign materials from biomass waste and converting them into value-added materials. In this study, cellulosic crystals derived from sugarcane bagasse (SCB) are augmented with magnetite (M) nanoparticles. Following the co-precipitation route, the composite was prepared, and then the mixture was subjected to a green microwave solvent-less technique. Various mass ratios of SCB:M (1:1, 2:1, 3:1, 5:1, and 1:2) were prepared and efficiently utilized as photocatalysts. To look at the structural and morphological properties of the prepared samples, X-ray diffraction pattern (XRD), scanning electron microscopy (SEM), and elemental analysis were used to describe the composite fibers. SCB:M augmented with H2O2 as a Fenton reaction was used to eliminate Reactive blue 19 (RB19) from polluted water and was compared with pristine SCB and M. Additionally, the response surface methodology (RSM) statistically located and assessed the optimized parameters. The optimal operating conditions were recorded at pH 2.0 and 3:1 SCB: M with 40 mg/L and 100 mg/L of hydrogen peroxide. However, the temperature increase inhibits the oxidation reaction. The kinetic modeling fit showed the reaction following the second-order kinetic model with an energy barrier of 98.66 kJ/mol. The results show that such photocatalyst behavior is a promising candidate for treating textile effluent in practical applications.
