Ibrahim, Talaat A.Gomaa, Abdalla2019-11-112019-11-112009Cited References in Web of Science Core Collection: 211290-0729https://doi.org/10.1016/j.ijthermalsci.2009.03.011https://www.sciencedirect.com/science/article/pii/S1290072909000817Accession Number: WOS:000270621300017In this work, the thermofluid characteristics of the elliptic tube bundle in crossflow have been investigated. Experimental and numerical investigations of the turbulent flow through bundle of elliptic tubes heat exchanger are carried out with a particular reference to the circular tube bundle. The investigation covers the effects of key design parameters of Reynolds numbers (5600-40,000), minor-to-major axis ratios (0.25, 0.33. 0.5 and 1) and flow angles of attack (0-150 degrees). Five bundles of elliptic tube heat exchangers with different axis ratios were designed and manufactured in staggered manner. Numerical CFD modeling using finite volume discretization method was conducted to predict the system performance extensively. Four methods were presented to resort a metric that expresses the thermal performance criteria of the elliptic tube bundle. The results indicated that, increasing the angle of attack clockwise until 90 degrees enhances the convective heat transfer coefficient considerably. The maximum thermal performance under constraint of a fixed pumping power or a mass flow rate was obtained at a zero angle of attack and the minimum thermal performance occurred at an angle of attack equals 90 degrees. The best thermal performance of the elliptic tube heat exchanger was qualified with the lower values of Reynolds number, axis ratio and angle of attack. (c) 2009 Elsevier Masson SAS. All rights reserved.enUniversity for Thermal performance criteriaTurbulent flowElliptic tube bundleArticlehttps://doi.org/10.1016/j.ijthermalsci.2009.03.011